Co2 laser engraving machine for cutting
1.An brief introduction of Co2 laser engraving machine
Co2 laser engraving machine,as is known to all, could both cut and engrave.
Both of these two functions are popular among the market.
Besides,there are different types about this machine:600*900,600*400,1300*2500 working area.
The customers could choose according to their different needs.
Yesterday there is a customes coming from Dubai, he wants to cut 6mm plywood, and the working are is as big as A3 paper.
According to his requirements, I introduce the 80w machine with 600*400 working area.
Here is the machine photo for your reference:
The machine parts:
2.The applied industry of the machine
The co2 laser engraving machine mainly apply to the printing industry, processing on the rubber sheet，plywood as well as hard board.
Besides, it could also apply to crystal engraving, handicrafts industry, and Acrylic sheet,etc.
So here u can see it could apply to many different industries. Showing some samples:
3.The machine parameter
|Laser tube power
|Water cooling and protection system
|Yongli Co2 laser tube
|Highest scanning precision
|Max moving Speed
|Min forming character
|0 – 45°C
|220V±10% 50HZ or 110V±10% 60HZ
|Picture Formats Supported
| PLT/DXF/BMP/AI (Direct output)
|DSP offline control, LED panel
|RD control system or Lasercut
|Laser tube (installed in the machine)
|Lens and Mirrors (installed in the machine )
|Water flow sensor
|User manual of machine(English version)
|User manual of software
The testing video for 6mm plywood with 80w machine
In the end, if this passage is useful to u , as well as bring u some help, and u are also interested in it,
pls contact me :